The Handlingssystem ATH-15 is designed only
for the handling and contacting of axial components in Tape.
The Basicsystem can be equipped with
aircylinder or solenoid driven contacts, or slip-contacts.
Up to 2 contact-sets are possible, for tests with recovery time in between.
Cutter
station for axial components up to 1.5mm
lead diameter and marking stations are optional.
The "FAIL"-parts can be cutted out from the tape with the switchable cutter
on bothe sides and the cutted component will fall into a box.
Retest at Kelvinfail as a standard. Inpur-Reel in direction
switchable.
As an Option available are:
Cuttingstation, Markingstation, color inkmarking station,
Component-Detection, 2 contactstations up
to 100mm distance in between, solenoid-contact-station,
slip-contacts, amopack-(fan
fold)-Option and Bowlfeeding-Option.
With slip-contacts in the 5mm (0.2") step-rate and
0-testtime, the system is reaching a throughput of up to 50,000 parts per hour.
The fast forward/rewind speed is ca. 66,000 parts per hour.
Steps: 5mm (0.2") and 10mm (0.4")
switchable, others on request.
Re-test at Kelvin-Fail, in Baseunit as standard.
Tapewidth adjustable in the range of 50mm (2") to 110mm (4.2").
Component diameters max. 18mm (0.7"). (Other diameters on request).
Tester-Interface-Signals normally 24V, other voltages on request.
e-mail address: sales@alpha-test.com
Homepage: http://www.alpha-test.com
fax: [49] 8151/55228
tel.: [49] 8151/55227