The Handler-System ATH-200 series is designed for
the automatic handling and contacting of Hybrids, Memory-Chips and ICīs like SOJ,
SO-ICīs, TSOPīs and others. It can be used to test or to program devices!
It has one Input-Stick, 4 contact-sites (1 to 4 contact sites possible, other no.īs,
depending on which components should be tested) and sorter with 2 output-sticks for
"GOOD" and "BAD" in the Standard-Version.
Versions with 5 Input-Sticks, 1 to 4 contact-sites and sorter with up to 9 outputs are
available.
Input with Bowlfeeder and/or Blistertape on request!
The ATH-200 is a very modular and flexible system which was designed to be an
outstanding, costeffective Handlingssystem for every need.
There are several versions of this unit available:
1. ATH-201, Standard Version, 1 Input-Stick, 2 Output-Sticks, 1 Conversion-Kit with 4
Contact-Sites.
2. ATH-202, Standard Version, 1 Input-Stick, 2 Output-Sticks, 1 Conversion-Kit with 1
Contact-Site.
3. ATH-203, Standard Version, 5 Input-Sticks, 2 Output-Sticks, 1 Conversion-Kit with 4
Contact-Sites.
4. ATH-204, Standard Version, 5 Input-Sticks, 2 Output-Sticks, 1 Conversion-Kit with 1
Contact-Site.
5. ATH-205, Standard Version, 5 Input-Sticks, 9 Output-Sticks, 1 Conversion-Kit with 4
Contact-Sites.
6. ATH-206, Standard Version, 5 Input-Sticks, 9 Output-Sticks, 1 Conversion-Kit with 1
Contact-Site.
7. ATH-207, Standard Version, 5 Input-Sticks, 9 Output-Sticks, 1 Conversion-Kit with 2
Contact-Sites and Marking Station below the Contact-Sites.
Other Versions on request!!
As an Option available are:
ATH-2I5, Input-Option with for 5 Input-Sticks.
ATH-2O9, Output-Option with 9 Bin-Sorter and Stickholder for 9 Output-Sticks.
ATH-C4SOJ, Conversion Kit for SOJ-ICīs, 300 to 400 MIL, with 4 Contactsites.
ATH-C1SOJ, Conversion-Kit for SOJ-ICīs, 300 to 400 MIL, with 1 Contactsite.
ATH-C4SO1, Conversion-Kit for SO-IC, 150 to 300 MIL, with 4 Contactsites.
ATH-C4SO, Conversion-Kit for SO-IC, 300 to 400 MIL, with 4 Contactsites.
ATH-C1SO1, Conversion-Kit for SO-IC, 150 to 300 MIL, with 1 Contactsite.
ATH-C1SO, Conversion-Kit for SO-IC, 300 to 400 MIL, with 1 Contactsite.
ATH-C4TS, Conversion-Kit for TSOP-ICīs, 300 to 400 MIL, with 4 Contactsites.
ATH-C1TS, Conversion-Kit for TSOP-ICīs, 300 to 400 MIL, with 1 Contactsite.
ATH-C4SP, Conversion-Kit for SOP-ICīs, 300 to 400 MIL, with 4 Contactsites.
ATH-C1SP, Conversion-Kit for SOP-ICīs, 300 to 400 MIL, with 1 Contactsite.
Other Options on request (like Convertion-Kits for PLCC, LCC, PIN-GRID, DILand others)
!
| Throughput at zero testtime and 4 contact sites: | approximately 5000 pieces per hour |
| Temperature: | ambient |
| Interface Signals: | programmable in polarity and voltage, minimum length 3ms |
| Conversion time: | approximately 10 Minutes |
| Airpressure: | 6 to 7 Bar |
| Weight: | 12 kg |
| Dimension: | 500 x 500cm, height ca. 600cm |
| Power Consumption: | max. 120Watts |
| Input Voltage: | 90 to 250 Volts AC |
| Current: | max. 1.5 Amps |
e-mail address: sales@alpha-test.com
Homepage: http://www.alpha-test.com
fax: [49] 8151/55228
tel.: [49] 8151/55227
