ATH-7000
Automatic DIMM-Handler series
Provides Fast, Reliable Memory Testing
The following versions of the ATH-700X
are available:
ATH-7000,
Basicsystem, without labeling and without sorting. Prepared already for the different
available outputs. Including 2 input magazines for 56/60 modules each. The loading of the
empty magazine will be done during test of the other one. After the magazine in the
Handler is empty, remove it from one side and slide in the full one from the other side.
Then the empty magazine can be filled up again.
ATH-7001, consists of Basicsystem ATH-7000,
without labeling but with sorter ATH-7S1.
This two parts together will become the ATH-7001. The ATH-7S1 is a 2 bin sorter for a „PASS"
and a „FAIL" bin. This Sorter sorts the Memory
Modules total reliable, loose into plastic bins. The System includes 2 input magazines for
56/60 modules each. The loading of the empty magazine will be done during the test of the
other one. After the magazine in the Handler is empty, remove it from one side and slide
the full one in from the other side. Then the empty magazine can be filled up again. ATH-7001 Sideview
ATH-7002, consists of Basicsystem ATH-7000, with sorter ATH-7S1 and labeling option ATH-7LP and the three parts together will become the ATH-7002. Labeling
only from one side, only one label at a time. Labels will be picked up directly from an
integrated label printer and sticked onto the 1. Chip at the
„PASS" Module. The position of the label on the module is mechanical
adjustable in X and Y direction. The direction of the label can be turned with the
included label turning station, from vertical to horizontal. With this Handler, the labels
can be printed also on the fly. The ATH-7S1
is a 2 bin sorter for a „PASS" and a „FAIL" bin. This Sorter sorts the Memory Modules
total reliable, loose into plastic bins. The System includes 2 input magazines for 56/60
modules each. Loading of the empty magazine will be done during test of the full one.
After the magazine in the Handler is empty, remove it from one side and slide in the full
one from the other side. Then the empty magazine can be filled up again.
ATH-7003, consists of Basicsystem ATH-7000, with sorter ATH-7S1 and labeling option ATH-7L and the three parts together will become the ATH-7002. Labeling only from one side, only one label at a time. Labels will be picked up from the integrated preprinted label roll and sticked onto the 1. Chip at the „PASS" Module. The position of the label on the module is mechanical adjustable in X and Y direction. The direction of the label can be turned with the included label turning station, from vertical to horizontal. The ATH-7S1 is a 2 bin sorter for a „PASS" and a „FAIL" bin. This Sorter sorts the Memory Modules total reliable, loose into plastic bins. The System includes 2 input magazines for 56/60 modules each. Loading of the empty magazine will be done during test of the full one. After the magazine in the Handler is empty, remove it from one side and slide in the full one from the other side. Then the empty magazine can be filled up again.
ATH-7006, consists of Basicsystem ATH-7000,
without labeling but with Trayloader and sorter ATH-7TL1 and the three parts together will become the ATH-7006.
The Sorter sorts the „PASS" Memory Modules
direct into double row plastic trays (50pcs with 5, 10, 15mm
spacing). The „FAIL" Modules will be sorted
loose into a FAIL-Bin. The first PASS-Module
will go into the lower position of the Trayloader and the second one to the upper
position. After both positions will be filled with a module, the Trayloader will
automatically put both modules at a time, controlled into the trays. The System includes 2
input magazines for 56/60 modules each. Loading of the empty magazine will be done during
test of the second one. After the magazine in the Handler is empty, remove it from one
side and slide in the full one from the other side. Then the empty magazine can be filled
up again.
ATH-7007, consists of Basicsystem ATH-7000,
with Trayloader, sorter ATH-7TL1
and labeling ATH-7LO and the
four parts together will become the ATH-7007. The Sorter sorts the „PASS" Memory Modules direct into double row plastic trays (50pcs with 5, 10, 15mm spacing). The „FAIL" Modules will be sorted loose into a FAIL-Bin. The first PASS-Module
will go into the lower position of the Trayloader and the second one to the upper
position. After both positions will be filled with a module, and the labeling is done, the
Trayloader will automatically put both modules at a time, controlled into the trays.
Labeling will be done only from one side, only one label at a time. Labels will be picked
up from a preprinted label-roll and sticked onto the 1. Chip at the „PASS" Module. The position of the label on the
module is mechanical adjustable in X and Y direction. The direction of the label can be
turned with the included label turning station, from vertical to horizontal. The labeling
will take place in the upper position of the Trayloader. The module will be grabbed and
then labeled. Includes 2 input magazines for 56/60 modules each. Loading of the empty
magazine will be done during test of the second one. After the magazine in the Handler is
empty, remove it from one side and slide in the full one from the other side. Then the
empty magazine can be filled up again.
ATH-7008, consists of
Basicsystem ATH-7000, with Trayloader, sorter ATH-7TL1 and labeling ATH-7LOP and the four parts together will become the ATH-7008. The
Sorter sorts the „PASS" Memory Modules
direct into double row plastic trays (50pcs with 5, 10, 15mm
spacing). The „FAIL" Modules will be sorted
loose into a FAIL-Bin. The first PASS-Module
will go into the lower position of the Trayloader and the second one to the upper
position. After both positions will be filled with a module, and the labeling is done, the
Trayloader will automatically put both modules at a time, controlled into the trays.
Labeling will be done only from one side, only one label at a time. Labels will be picked
up directly from an intergrated label printer and sticked onto the 1. Chip at the „PASS" Module. The position of the label on the
module is mechanical adjustable in X and Y direction. The direction of the label can be
turned with the included label turning station, from vertical to horizontal. The labeling
will take place in the upper position of the Trayloader. The module will be grabbed and
then labeled. Includes 2 input magazines for 56/60 modules each. Loading of the empty
magazine will be done during test of the second one. After the magazine in the Handler is
empty, remove it from one side and slide in the full one from the other side. Then the
empty magazine can be filled up again.
ATH-7009, consists of Basicsystem ATH-7000, with Trayloader, sorter ATH-7TL1 and labeling ATH-7LOP and the four parts together will become the ATH-7009. The Sorter sorts the „PASS" Memory Modules direct into single or double row plastic trays (25/50/100pcs with 5, 10, 15mm spacing). The „FAIL" Modules will be sorted loose into a FAIL-Bin. The first PASS-Module will go into the lower position of the Trayloader and the second one to the upper position. After both positions will be filled with a module, and the labeling is done, the Trayloader will automatically put both modules at a time, controlled into the trays. Labeling will be done only from one side, only one label at a time. Labels will be picked up directly from an intergrated label printer and sticked onto the 1. Chip at the „PASS" Module. The position of the label on the module is mechanical adjustable in X and Y direction. The direction of the label can be turned with the included label turning station, from vertical to horizontal. The labeling will take place in the upper position of the Trayloader. The module will be grabbed and then labeled. Includes 2 input magazines for 56/60 modules each. Loading of the empty magazine will be done during test of the second one. After the magazine in the Handler is empty, remove it from one side and slide in the full one from the other side. Then the empty magazine can be filled up again.
OPTIONS:
ATH-7PS, additional
Software Package for the Label Printer Option ATH-7LP1. With this Option, the
datas will be picked out of the tester (if the tester can
deliver it) including the datas which will be written into the SPD and will be combined
with the typed in datas. These complete information can be transferred to the Label
Printer. So all current informations can be printed onto the label on the fly.
ATH-7ATL, semi-automatic magazine loader. With this
option the modules can be filled out of trays into the ATH-7ATL. Turning round the ATH-7ATL,
the modules will be loaded into the ATH-7000 standard magazines. This option is a
tool to load the ATH-7000 magazines easily out of plastic trays.
ATH-7AML, automatic magazine loader. This option fills loose modules out of a staplemagazine into the ATH-7000 magazines. After filling a staple of modules into the input, the ATH-7AML will singulate the modules and fill it smoothly into the ATH-7000 magazine.
ATH-7PAL, automatic panels into magazine loader. This option cuts out the modules from the module panels and fills these modules directly into the ATH-7000 magazines. Depending on the size and the type of panels, the ATH-7PAL holds up to max. 6 panels and cuts out the modules. The modules will then be singulated and will be filled into the magazine.
ATH-7PL, automatic panel loading option. This option cuts out the modules from panels and fills these modules directly into the ATH-7000 Handler input. Depending on the size and the type of panels, the ATH-7PL holds up to max. 6 panels and cuts out the modules. The module will then be directly feeded into the contact-station of the ATH-7000.
Available are also chip-handlers, series ATH-200 for TSOP, SOJ, SO-IC, and others. Also with multiple test-sites in one rail.
Also a Tray to Tray Handler, Series ATH-1000.
To complete the range of units ALPHA-TEST can supply, there is a complete range of Handling-Systems, a Component Tester and Memory Testsystems.
The company ALPHA-TEST
Automatisierungs- und Systemtechnik GmbH, is in the market of testing and
handling almost all components and boards since 1985. The well educated and trained
peoples of ALPHA-TEST GmbH will guarantee the fast and high
quality support for the customers in Europe.
The European sales and support-center is placed in Germany, 20km
south-west of munich, in Berg at the Starnberger Lake.
Our domains: http://www.alpha-test.com or http://www.dimmtester.de or http://www.memorytester.de
Our e-mail: sales@dimmhandler.com or at@dimmhandler.com
