LOW COST DIMM-Labeler
ATL-9000
Designed to speed up memory manufacturing, the ATL-9000
series consists of low cost automatic labeler, built to provide memory module
manufacturers, whole sellers, retailers and system integrators a very cost-effective
method of automatically labeling memory modules in a fast, reliable and safe manner.
Intended with high-volume manufacturing in mind, the labeler ATL-9001 to ATL-9005
holds a staple of up to 100 modules in the vertical staple-magazine.
The modules will be singulated smoothly and transported to the label site over a transport
tape!
At the label site, the modules will be clamped, to get it to the right position. With the
labeler mounted there, the module will be labeled with a label coming out of the
integrated label printer.The position of the lable is easy adjustable in x- and
y-direction.
NEW!!!
Because nowadays, more and more
modules are manufactered based on BGA-Chips, it´s no longer possible to
use Bins in the output. So we developped a output staple-magazine. The
module will be transported smoothly into the magazine. As soon as the
module arrives in the magazine, it will be transported to the staple and
the position is free again for the next one. This is an option and can be
integrated also into older models.
Available are also the series ATL-9101 to
ATL-9105, as versions for flash-cards, multimedia-cards, SD-cards, XD-Cards, smartmedia-cards, and
other memory-cards.
The highlight of this labeler is the fast, easy and very safe, smooth transport, and the precise
and safe labeling procedure, of the module.
The entire process is 100% automated and almost
hands-free. The labeler provides labor saving labeling where operator errors are
completely eliminated.
The handlingstime is approximately 2 seconds per module. So the index time = handlingstime
+ labelingstime = 4 seconds.
As ATL-9000, the labeler comes
with an integrated labelprinter. The label will be picked up directly from the printer and
will be sticked on the label. The PC for the controling of the printer is not included.
But can be ordered as an option.
ATL-9001, applcator in labelposition, Printer Type I
System, view from output, applicator in labelposition, Staplemagazine seen in the back.
Labelposition seen from Input Side
Labelposition seen from Output Side
Erhältliche Ausführungen:
ATL-9000, Basicsystem
for 168/184Pin DIMM-Modules and prepared for Docking-Unit for Printer Type I. Without
Printer, Printerdocking-Option, Control-PC and Label-Designsoftware. System built as desktop version based on an
aluminium Profile-Frame.
ATL-9001, Basicsystem for 168/184Pin DIMM-Modules and
Docking-Unit for Printer Type I. Without Printer, Control-PC and Label-Designsoftware.
System built as desktop version based on an aluminium Profile-Frame.
ATL-9004,
Basicsystem for 168/184Pin DIMM-Modules
and Docking-Unit for Printer Type VI and Type VII and VIIa. Without Printer, Control-PC and
Label-Designsoftware. System built as desktop version based on an aluminium Profile-Frame.
ATL-9005, Basicsystem for
168/184Pin DIMM-Modules and Docking-Unit for Zebra Industrial-Printer.
Without Printer, Control-PC and Label-Designsoftware. System built as desktop version
based on an aluminium Profile-Frame.
ATL-9010, Basicsystem,
convertible, with Conversion-Kit for 168/184Pin DIMM-Modules and prepared
for Docking-Unit for Printer Type I. Without
Printer, Printerdocking-Option, Control-PC and Label-Designsoftware. System built as desktop version based on an
aluminium Profile-Frame.
ATL-9011, Basicsystem, convertible, with Conversion-Kit for
168/184Pin DIMM-Modules and Docking-Unit for Printer Type I. Without Printer, Control-PC and Label-Designsoftware.
System built as desktop version based on an aluminium Profile-Frame.
ATL-9014,
Basicsystem, convertible, with
Conversion-Kit for 168/184Pin DIMM-Modules
and Docking-Unit for Printer Type VI and Type VII and VIIa. Without Printer, Control-PC and
Label-Designsoftware. System built as desktop version based on an aluminium
Profile-Frame.
ATL-9015, Basicsystem,
convertible, with Conversion-Kit for 168/184Pin DIMM-Modules and
Docking-Unit for Zebra Industrial-Printer.
Without Printer, Control-PC and Label-Designsoftware. System built as desktop version
based on an aluminium Profile-Frame.
OPTIONS:
ATL-9000P1, Integrated Labelprinter Type I, Thermotransfer printhead, Resolution
200dpi.
ATL-9000P2, Integrated Labelprinter Type II, Thermotransfer printhead,
Resolution 300dpi.
ATL-9000P6,
Integrated Labelprinter Type VI, Industrial version,
Thermotransfer printhead, Resolution 200dpi.
ATL-9000P7, Integrated
Labelprinter Type VII, Industrial version, Thermotransfer printhead, Resolution 300dpi.
ATL-9000P7a, Integrated
Labelprinter Type VIIa, Industrial version, Thermotransfer printhead, Resolution 300dpi.
Max. printspeed 8"/sec.
Conversion-Kits for
SODIMM-Modules and Memory-Cards available.
ATL-9000LSWL,
Softwarepackage to create and design Labels, Lite
Version.
ATL-9000LSW, Softwarepackage to Control the Labelprinter and Software to create
and design Labels.
Available are also chip-handlers, series ATH-200 for TSOP, SOJ, SO-IC, and others. Also with multiple
test-sites in one rail.
Also the Tray to Tray Handler, Series ATH-1000.
To complete the range of units ALPHA-TEST can
supply, there is a complete range of Handling-Systems, a Component Tester and Memory
Testsystems.
